Bauknecht CTDI K 840C NE Návod k použití stáhnout pdf (Strana 45)

Operation

4.18 Power boost

The power boost setting makes additional power available

for induction cooking zones. A large quantity of water can be

brought to the boil very quickly. The power boost setting ope-

rates for 5 minutes, after which the power level is automatical-

ly reduced to power setting 9.

1. Switch on the hob.

2. Then press a cooking zone selection key (e.g..

for

back). The selected power setting indicator will light up

brightly.

3. Press the Minus key once in order to set the highest

power setting 9.

4. Press the Plus key once in order to activate the power

boost setting. The power setting indicator will show a P.

5. After 5 minutes the power boost setting will switch oﬀ au-

tomatically. The P will go oﬀ and the power level will switch

down to 9.

Notes

• Press the minus key to prematurely de-activate the power

setting.

• Attention. risk of overheating! Do not heat up any oil/

frying fat with the power boost setting.

4.19 Bridging function

The front and the rear cooking zones may be activated to-

gether for a cooking process (bridging function). This enables

larger cookware to be used.

1. Switch on the hob.

2. Press the two cooking zone selection keys of the front

and back cooking zones simultaneously to activate the

bridging function.

The bridging function is activated, the symbol appears.

Use the Plus key or Minus key to select a power

setting.

3. To deactivate the two cooking zone selection keys press

them simultaneously again or switch oﬀ the hob.

Notes

The roaster or the pot will need to cover at least half of the

cooking zones used in order to be recognised by the pan

recognition device!

4.20 Power management

For technical reasons two cooking zones always comprise a

module and have a maximum power level.

If this power range is exceeded when a higher power setting

level or the power boost function is switched on the power

management system will reduce the power setting of the cor-

responding cooking zone of the module.

The display for this cooking zone will initially blink, after which

the highest-possible power setting will be consistently display-

ed.

Modules (power management)

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 119 120

Komentáře k této Příručce

Žádné komentáře

Bauknecht CTDI K 840C NE Návod k použití Strana 45

Komentáře k této Příručce

Související produkty a manuály pro Sporáky Bauknecht CTDI K 840C NE